more stragglers

Signed-off-by: Leah Rowe <leah@libreboot.org>

site/docs/grub/index.md

@@ -36,7 +36,7 @@ create a special keymap file for GRUB. [Learn how to build GRUB](../build/)
 When you've built GRUB, using `lbmk` (libreboot build system), take your kepmap
 file (generated by ckbcomp) and run it through `grub-mklayout` like so:
 
-	cat frazerty | ./grub/grub-mklayout -o frazerty.gkb
+	cat frazerty | ./src/grub/grub-mklayout -o frazerty.gkb
 
 Place the newly created `.gkb` file under `config/grub/keymap` in lbmk. When
 you build libreboot, a ROM image with GRUB payload and your newly created

site/docs/hardware/hp8200sff.md

@@ -253,7 +253,7 @@ default back to 3.
 
 Libreboot locks CMOS/NVRAM settings, but you can change the default setting in
 the *ROM* by using the `-C` option in nvramtool. You can find this under the
-directory `coreboot/default/util/nvramtool` when downloading coreboot inside
+directory `src/coreboot/default/util/nvramtool` when downloading coreboot inside
 of lbmk by running the command:
 
 	./update project trees -f coreboot default

site/docs/install/ivy_has_common.md

@@ -153,48 +153,3 @@ the `-b` flag in the `blobutil inject` command. For example, if you
 used `-b t440p_12mb` on a ROM image that actually corresponds
 to `t440pmrc_12mb`, then the required `mrc.bin` file would not be added
 and that ROM would not boot when flashed.**
-
-**NOTE: In the Libreboot 20230319 src archive or git tag, the `blobutil`
-insert method is broken on Haswell configs that need `mrc.bin`, because it does
-not insert `mrc.bin` at the correct offset. This was fixed in revisions after
-the release, and will be available in the next release after that. Read
-the [Libreboot 20230319 update
-announcement](../../news/libreboot20230319_update.md) for more information.**
-
-NOTE: the MAC changer makes use of `nvmutil`, which you can read more about in
-the [nvmutil documentation](nvmutil.md).
-
-**WARNING: This is broken in Libreboot 20221214's src archive. It fails when
-attempting to use cbfstool, due to a faulty check in a script. This is fixed in
-recent Libreboot releases or revisions. The fix is as
-follows (though you really should use a new release by now):
-
-Edit line 137 in `resources/scripts/blobs/inject`. The line in 20221214 says
-this:
-
-	make -C cd coreboot/default/util/cbfstool || Fail 'could not build ifdtool'
-
-Modify it to say this:
-
-	make -C coreboot/default/util/cbfstool || Fail 'could not build cbfstool'
-
-ALSO:
-
-*When generating a MAC address*, the same script tries to build `nvmutil`
-from `/util/nvmutil`, in Libreboot 20221214. This was discovered on 10 January
-2023, based on user report on IRC. Fix it like so (already fixed, in latest
-Libreboot from Git):
-
-Line 30, it says:
-
-	make -C /util/nvmutil || Fail 'failed to build nvmutil'
-
-Change it to say:
-
-	make -C util/nvmutil || Fail 'failed to build nvmutil'
-
-Until this is edited accordingly, the inject script will *exit* with non-zero
-status, and no blobs will be injected.
-
-This has been fixed, following the Libreboot 20221214 release, but you must
-apply this fix yourself, if using *that* release.

site/docs/install/ivy_has_common.uk.md

@@ -157,47 +157,5 @@ used `-b t440p_12mb` on a ROM image that actually corresponds
 to `t440pmrc_12mb`, then the required `mrc.bin` file would not be added
 and that ROM would not boot when flashed.**
 
-**NOTE: In the Libreboot 20230319 src archive or git tag, the `blobutil`
-insert method is broken on Haswell configs that need `mrc.bin`, because it does
-not insert `mrc.bin` at the correct offset. This was fixed in revisions after
-the release, and will be available in the next release after that. Read
-the [Libreboot 20230319 update
-announcement](../../news/libreboot20230319_update.md) for more information.**
-
 NOTE: the MAC changer makes use of `nvmutil`, which you can read more about in
 the [nvmutil documentation](nvmutil.md).
-
-**WARNING: This is broken in Libreboot 20221214's src archive. It fails when
-attempting to use cbfstool, due to a faulty check in a script. This is fixed in
-recent Libreboot releases or revisions. The fix is as
-follows (though, you really should use a newer release by now):
-
-Edit line 137 in `resources/scripts/blobs/inject`. The line in 20221214 says
-this:
-
-	make -C cd coreboot/default/util/cbfstool || Fail 'could not build ifdtool'
-
-Modify it to say this:
-
-	make -C coreboot/default/util/cbfstool || Fail 'could not build cbfstool'
-
-ALSO:
-
-*When generating a MAC address*, the same script tries to build `nvmutil`
-from `/util/nvmutil`, in Libreboot 20221214. This was discovered on 10 January
-2023, based on user report on IRC. Fix it like so (already fixed, in latest
-Libreboot from Git):
-
-Line 30, it says:
-
-	make -C /util/nvmutil || Fail 'failed to build nvmutil'
-
-Change it to say:
-
-	make -C util/nvmutil || Fail 'failed to build nvmutil'
-
-Until this is edited accordingly, the inject script will *exit* with non-zero
-status, and no blobs will be injected.
-
-This has been fixed, following the Libreboot 20221214 release, but you must
-apply this fix yourself, if using *that* release.

site/docs/linux/grub_cbfs.md

@@ -67,9 +67,9 @@ Finally, compile the `cbutils` payload (and you will then have the utils):
 	./build fw grub
 
 Among other things, this will produce a `cbfstool` executable under any of the
-subdirectories in `coreboot/` under `util/cbfstool/cbfstool
+subdirectories in `src/coreboot/` under `util/cbfstool/cbfstool`.
 
-For example: `coreboot/default/util/cbfstool/cbfstool`
+For example: `src/coreboot/default/util/cbfstool/cbfstool`
 
 The `cbfstool` utility is what you shall use. It is used to manipulate CBFS
 (coreboot file system) which is a file system contained within the coreboot

site/docs/maintain/index.md

@@ -154,8 +154,8 @@ or multiple branches in the same tree; entirely separate directories are
 created, for each revision of coreboot used, each able to have its own patches.
 These can then be re-use appropriately, per mainboard. For example:
 
-* `coreboot/default` is used by most mainboards.
-* `coreboot/cros` is used by cros devices.
+* `src/coreboot/default` is used by most mainboards.
+* `src/coreboot/cros` is used by cros devices.
 
 This may be less efficient on disk usage, but it simplifies the logic greatly.
 Coreboot also uses its own toolchain called *crossgcc*, and crossgcc is in fact

site/news/audit2.md

-% Libreboot Build System Audit 2 (new Libreboot release soon!)
+% Libreboot Build System Audit 2
 % Leah Rowe
 % 11 September 2023
 
-This is *not* a new release announcement, but a new release *is* coming soon!
-This new audit has been the opening act, now concluded and the priority will
-now shift once again to new hardware support.
-
 Introduction
 ============
 

site/news/update202308.md

@@ -99,18 +99,3 @@ compiled from source. See:
 
 [How to compile Libreboot from source](../docs/build)
 
-If you have an *existing* clone of lbmk, where you built it, and you want to
-use it in place, you could do this:
-
-```
-cd lbmk/ # obviously, you need to be in lbmk
-rm -Rf coreboot/default grub seabios payload/grub payload/seabios
-cd coreboot/coreboot
-git pull
-cd ../../
-git pull
-```
-Then simply build it as normal, and the new coreboot/grub/seabios will be
-pulled in.
-
-Have fun!